Decorate your place with these chic bright LED Strip lights. Get Them Now!
The price is only Led Strip, no inclusion of a Power Supply or Led Controller.
Note:WS2812B Must Use DC5V Power Supply AND Led Controller to Control!
Every 0.5meter with solder joints, please note!
White PCB / Black PCB.
30leds/m, 60leds/m, 74leds/m, 96leds/m, 100leds/m, 144leds/m.
IP30: Non-Waterproof.
IP65: Waterproof in Silicon Coating.
IP67: Waterproof in Silicon Tube.
The length as you choose.
Input Voltage:DC 5v.
Power:
30leds/m----9watt/meter.
60leds/m----18watt/meter.
74leds/m----22watt/meter.
96leds/m----28.8watt/meter.
100leds/m----30watt/meter.
144leds/m----43.2watt/meter.
LED Resource: WS2812B led (5050 SMD RGB LED with a built-in improved version of ws2811 ic).
LED: Each LED is separately controlled.
IC Type: Improved version ws2812 IC(built inside the 5050 SMD RGB led).
Of IC: (1 IC drives 1 led chip).
Pixels: 30/60/74/96/100/144/meter.
Grey Scale: 256.
Bits/color: 8-bits/color.
FPCB Width:
30leds/m----10mm.
60leds/m----10mm.
74leds/m----12mm.
96leds/m----12mm.
100leds/m----10mm.
144leds/m----12mm.
FPC Color: Black/White.
Protection rate:
IP30 Non-Waterproof.
IP65 Waterproof in Silicon Coating.
IP67 Waterproof in Silicone Tube.
Lighting Colors: Full colour RGB, dream colour changing.
Cuttable: Every LED is cuttable.
Package: In the anti-static bag, IP30 IP65 with 3M adhesive tape on the back.
(IP67 without 3M adhesive).Each strip with one free male connector for connector.
The difference between the WS2812B and WS2812B-ECO.9pcs Pure Gold Line, Copper Bracket (WS2812B).
10pcs Admixture Gold Line, Brass Bracket (WS2812B-ECO).
There is capacitance on FPCB board (WS2812B).
It doesn't need capacitors on FPCB board (WS2812B-ECO).
Red: 400-700mcd, Green: 1000-1500mcd, Blue: 200-400mcd (WS2812B).
Red: 300-500mcd, Green: 600-1000mcd, Blue: 200-300mcd (WS2812B-ECO).
36 Months (WS2812B), 18 Months (WS2812B-ECO).
Such as Park, Square, Hotel, Airport, Office Building, Shopping Mall, Coffee Bar, KTV, Supermarket, etc (WS2812B).
Usually applied to Parlour, Bedroom, TV light, Karaoke Television light, Computer light, DIY and Home decoration, etc (WS2812B-ECO).
I did Ambilight, it turned out well. I will write a couple of tips: 1) I took 60 S/M, IP65, so that it is possible to wipe with a damp cloth dust from the tape, it is convenient (not corners-do not take it, that's bullshit, maybe I'm krivorukky, but they do not have much contact, they still had to lose, Because of this, they did not close then, they had to use a hot glue (+ corners expensive) 3) fed all this case from the Molex from the BP, which is is is Arduino is powered by USB from the monitor. The problem is that the BP does not turn off. I decided it simply-turn off the monitor after completing the work, Arduino stops feeding and the power supply quietly completes the shutdown. Consumption can be seen in the photo, but above 2A did not rise (fully white screen)